XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Front Crankshaft Seal: Service and Repair
Oil Pump/Crankshaft Seal, Front, Replacing
Oil pump / crankshaft seal, front, replacing
Special tools:
999 5433 COUNTERHOLD See: Tools and Equipment/999 5433 Counterhold
998 6187 UNIVERSAL PULLER 100 See: Tools and Equipment/998 6187 Universal Puller 100
999 5919 PULLER See: Tools and Equipment/999 5919 Puller
999 5455 PUNCH See: Tools and Equipment/999 5455 Punch
951 2050 BEVEL PROTRACTOR See: Tools and Equipment/951 2050 Bevel Protractor
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information is always correct.
Note! If the oil pressure is low or if there is possibly a fault with the oil pump, measure the oil pressure.
Remove engine components
Caution! Remove the ignition key.
Remove
-
the cross stay between the suspension turrets
-
the upper timing belt cover
-
the servo reservoir and expansion tank. Lift up and place on top of the engine.
Warning! Ensure that no power steering fluid is spilled. Extremely flammable.
-
the auxiliaries belt
-
the front timing belt cover.
Position the engine according to the marking