XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Install:
-
a new gasket held in position by the lower screws for the intake manifold. Do not forget the clamp for the fuel line at the screw in the lower
row.
-
the nipple for the water heated crankcase ventilation
-
the intake manifold. Do not forget the crankcase ventilation hose. The hose must be inserted up through the gap between the second and third ducts
-
the 3 upper screws. Torque tighten all the screws starting from the center.
Finishing
Install
-
the fuel rail. Press together the quick-release connector. Use new screws, see also: Fuel line, lock See: Powertrain Management/Fuel Delivery and
Air Induction/Fuel Rail/Service and Repair
-
injector connectors
-
the protective cover over the fuel rail
-
the vacuum hoses according to the earlier markings
-
the plastic charge air pipe between the throttle body (TB) and the charge air cooler (CAC)
-
the connectors to the throttle body (TB)
-
the dip stick in the intake manifold.
Final check
Test drive the car. Check the following:
-
that there is no fuel leakage
-
that the engine operates normally.
Check that everything is in position. Clean the engine compartment.
