XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
The illustration shows the driver door module (DDM).
-
Remove the control module, see instruction Removing the control module.
-
Disconnect the catches. Lift the upper panel from the control module.
Installing the upper panel
In reverse order.
Driver Door Module (DDM)
Driver door module (DDM), replacing
Preparations
Caution! New software can only be ordered when the control module is installed in the car. VIDA reads off the new control module identity
which is required to order the correct software.
Always check that the control module and control module box connectors do not have bent or damaged terminals or sockets. This may have been the
cause of the fault.
Removing the driver door module (DDM)
