volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 1169 > < Reading and Clearing Diagnostic Trouble Codes|Page 1167
Page 2
background image

Select "Continue" when the fault has been remedied.

Continue - Checking components

-------------------------------------------------

Checking components

Activate the tailgate wiper. Read off the status.

Hint: If the readout of tailgate wiper status was OK, the fault was caused by a damaged fuse or relay. The fuse can blow if relays are activated in the
wrong order. This can happen when the key is turned from position I to position II and the wiper arm is activated at the same time.

Was the tailgate wiper status OK?

Yes - Troubleshooting procedure complete

No - Replacing the component

-------------------------------------------------

Replacing the component

Replace the wiper switch.

Other information:

-

For replacing the wiper switch: Washer / wiper switch, replacing See: Sensors and Switches/Sensors and Switches - Wiper and Washer
Systems/Wiper Switch/Service and Repair 

Reading and Clearing Diagnostic Trouble Codes|Page 1169 > < Reading and Clearing Diagnostic Trouble Codes|Page 1167