volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 1245 > < Reading and Clearing Diagnostic Trouble Codes|Page 1243
Page 13
background image

Yes - No Fault Found

No - Replacing the component

-------------------------------------------------

Replacing the component

Replace the turn signal lamp switch

Other information:

-

To replace the turn signal lamp switch, see Turn signal switch, replacing, TF-80SC AWD, AW50/51 AWD, M66 AWD See: Lighting and
Horns/Sensors and Switches - Lighting and Horns/Turn Signal Switch/Service and Repair.

Select "Continue" when the fault has been remedied.

Continue - Checking components

-------------------------------------------------

Checking components

Activate the turn signal lamp switch. Read off the status.

Hint: If the turn signal lamp switch status is OK, the fault is in the turn signal lamp switch.

Was the status of the turn signal lamp switch correct?

Yes - FAULT FOUND

No - Replacing the component

-------------------------------------------------

Replacing the component

Try replacing the steering wheel module (SWM).

Caution! A new control module is delivered without software. The control module must be programmed in order to function after replacement.

Other information:

-

To replace and program the steering wheel module (SWM), see Steering wheel module (SWM), replacing See: Service and Repair/Steering Wheel
Module (SWM), Replacing.

Reading and Clearing Diagnostic Trouble Codes|Page 1245 > < Reading and Clearing Diagnostic Trouble Codes|Page 1243