volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 1272 > < Reading and Clearing Diagnostic Trouble Codes|Page 1270
Page 40
background image

The ohmmeter should read approximately 0 ohms.

OK - Procedure complete

Not OK - Checking for open-circuits, contact resistance and oxidation

-------------------------------------------------

Checking for open-circuits, contact resistance and oxidation
For the control module
, check ground terminal 31/84 and the wiring connected to it. Check for an open-circuit. See Checking wiring and terminals.
Permanent fault See: Accessories and Optional Equipment/Cellular Phone/Testing and Inspection/Component Tests and General Diagnostics/Checking
Wiring and Terminals. Permanent Fault. Check for contact resistance and oxidation. See Checking wiring and terminals. Permanent fault See:
Accessories and Optional Equipment/Cellular Phone/Testing and Inspection/Component Tests and General Diagnostics/Checking Wiring and Terminals.
Permanent Fault.

Reading and Clearing Diagnostic Trouble Codes|Page 1272 > < Reading and Clearing Diagnostic Trouble Codes|Page 1270