XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Caution! Remove the ignition key.
Remove
-
the screw holding the engine stabilizer brace to the bracket on the engine
-
the screws holding the engine stabilizer brace to the suspension turrets
-
the engine stabilizer brace.
Applies only to B6xx4T engines:
Remove the plastic pipes between the turbocharger (TC) and charge air cooler (CAC) and between the air cleaner (ACL) and turbocharger (TC). Put
them to one side.
Remove the clamp from the intake manifold for the turbocharger (TC) for cylinders 1, 2 and 3. Turn the upper section of the pipe towards the firewall.
Relieve the load from the belt tensioner. Remove the auxiliaries belt.
Remove the upper timing belt cover.
Remove the front timing belt cover.
Lift up the servo reservoir and place it on top of the engine.
Note! Ensure that the oil does not leak from the ventilation hole in the filler cap.
Seal the hose between the expansion tank and the radiator. Disconnect the hose at the tank.
Lift up the expansion tank and place it on top of engine.
