volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Removal and Replacement|Page 3395 > < Removal and Replacement|Page 3393
Page 1
background image

Timing Belt: Overhaul

Dismantling the Belt Transmission

Dismantling the belt transmission

Special tools:

999 5304 SEPARATOR See: Tools and Equipment/999 5304 Separator 
999 5433 COUNTERHOLD See: Tools and Equipment/999 5433 Counterhold 

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.

Aligning the engine according to the marking

Install the upper timing belt cover.
Turn the crankshaft clockwise until the markings on the crankshaft belt pulley and the timing belt pulley are aligned with the markings on the oil pump
and the upper timing belt cover
Remove the upper timing belt cover.

Removing the vibration damper

Removal and Replacement|Page 3395 > < Removal and Replacement|Page 3393