XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Apply thread sealant, P/N 11-61 056, to all the screws for the oil pump.
Install the screws as a guide.
Carefully tap in the oil pump with a rubber mallet.
Tighten the oil pump crosswise. Tighten to 10 Nm.
Remove sliding sleeve 999 5747.
Installing the crankshaft timing gear pulley
Note! The timing gear pulley can only be installed in one position on the crankshaft journal splines (see the illustration).
Carefully tap in the timing gear pulley with a rubber mallet.
Installing the idler pulley and belt tensioner
Install
-
idler pulley. Tighten
-
the belt tensioner and the centre screw so that the tensioner fork is centered over the cylinder block rib. Do not tighten
-
the lower belt guard at the oil pump
-
the fuel delivery line.
Installing the timing gear pulley for the camshafts