volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 3475 > < Procedures|Page 3473
Page 4
background image

Caution! Make sure that the cable cannot enter the timing gears by clamping any excess cable with cable ties.

Applies to all: Installing VVT-control valve 

Clean the gasket faces. Note the cleanliness requirements above.

Install a new gasket.
Install a new control valve. Tighten the control valve crosswise. Tighten to 10 Nm

Connect the connector.

Procedures|Page 3475 > < Procedures|Page 3473