XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Valve Clearance: Adjustments
Valve Clearance
Valve clearance
Special tools:
951 2767 Roller See: Tools and Equipment/951 2767 Roller
999 5450 Punch See: Tools and Equipment/999 5450 Punch
999 5451 Adjustment Tool See: Tools and Equipment/999 5451 Adjustment Tool
999 5452 Camshaft Adjustment Tool See: Tools and Equipment/999 5452 Camshaft Adjustment Tool
999 5454 Press Tool See: Tools and Equipment/999 5454 Press Tool
999 5670 Pliers See: Tools and Equipment/999 5670 Pliers
999 5718 Drift See: Tools and Equipment/999 5718 Drift
999 5719 Drift See: Tools and Equipment/999 5719 Drift
999 5752 Feeler gauge See: Tools and Equipment/999 5752 Feeler Gauge
999 5765 Holder camshaft See: Tools and Equipment/999 5765 Holder Camshaft
Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.
Note! There are a number of versions of the variable valve timing unit. Therefore, it is extremely important to always read the information
referring to the engine variant/model year to be worked on.
Preparation
Remove the cable from the battery negative terminal. First read Battery, disconnecting See: Starting and Charging/Battery/Service and
Repair/Procedures/Battery, Disconnecting.
Check the valve clearance.
Note! Note the valve clearance in the inspection form!
Remove
-
the cross stay between the suspension turrets
-
the ground strip from the cylinder head
-
the upper engine stabilizer brace
-
the cover in the cylinder head at the rear of the exhaust camshaft
-
the crankcase ventilation hose from the top of the camshaft cover
-
the radiator breather tube from the expansion tank. Install lock grip pliers.
Lift up the brake fluid reservoir.
Disconnect the ABS sensor connector.
Place the brake fluid reservoir over the engine.
Warning! Make sure that no fluid is spilled on the engine. It is extremely flammable!
Disconnect the connector for the level sensor in the expansion tank.
Lift up and place the expansion tank on top of the engine.
