XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Install the lines according to the noted routing.
Tighten the return line and the delivery line against the steering gear. See See: Specifications/Mechanical Specifications/Steering
Remove the lock grip pliers from the feeder cable.
Note! Use a new O-ring on the pipe at the steering gear.
Install the clips holding the pipes together.
Installing the sub-frame
Install the sub-frame. See Sub-frame front, replacing See: Body and Frame/Frame/Subframe/Front Subframe/Service and Repair or Sub-frame front,
replacing See: Body and Frame/Frame/Subframe/Front Subframe/Service and Repair for 5- or 6-cylinder engines.
Installing the return hose
Install the return hose on the oil cooler.
Note! Use a new clamp.
Installing delivery lines
Install:
-
the delivery line on the power steering pump. Tighten. See See: Specifications/Mechanical Specifications/Steering
-
lock facing, M6.
Remove the lock grip pliers from the feeder hose.
Note! Use a new O-ring on the pipe at the power steering pump.
Diesel only
Install the clamp, 1 x M6, on the stay between the power steering pump/engine.
Finishing