XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Turn the crankshaft in the direction of engine rotation until the next marking In2/Ex5 is opposite the flange on top of the cylinder head. Perform the test
measurement according to the previous description.
Continue by measuring the remaining valve clearances according to the markings on tool 999 5754 Camshaft pos. See: Tools and Equipment/999 5754
Camshaft Pos..
Finishing
Note! For tightening torques not in the text, see Tightening torque See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical
Specifications/Tightening Torque.
Install (common)
-
the plugs for the test holes. Tighten to 20 Nm
-
the ignition coils according to the earlier markings
-
the ground connections
-
the connector for the variable valve timing solenoid.
Remove tool 999 5754 Camshaft pos. See: Tools and Equipment/999 5754 Camshaft Pos..
Install (naturally aspirated engine)
-
the trigger wheel. Tighten to 17 Nm.
Note! Ensure that the trigger wheel is correctly positioned against the camshaft.
