XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Fold up the carpet. Detach the sill trim panel slightly.
Carefully lift up the insulation block and place a block under the insulation block to access the module.
Install the new module and connect the cable connector.
Remove the block and fold the carpet back. Press the sill trim panel into place.
Installation
Vehicles with fuel pump driver module originally located in the right-hand rear wheel housing
Install two rubber plugs for the wheel housing.
Use: Plug, 974688
Install the inner fender with plastic nuts and rivets
Install wheel. Refer to: Installing wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair