volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Body - Front/Rear Door Weatherstrips Come Loose|Page 161 > < Instruments - BLIS Service Required With Specific DTC's|Page 155
Page 1
background image

Front Door Weatherstrip: All Technical Service Bulletins
Body - Front/Rear Door Weatherstrips Come Loose

Retailer Technical Journal 304
Door primary seal adhesion

Date 1-5-2009

Reference: n/a

Note! 

If using a printed copy of this Retailer Technical Journal, first check for the latest online version.

AFFECTED VEHICLES:

DESCRIPTION: 
We have discovered that in some cases the adhesion of the primary door
seal may deteriorate over time. If the customer has reported this condition, do not replace the door seal, see the instructions for how to correctly reinstall.

IMPORTANT NOTE

The method / material currently listed in VIDA are incorrect.

MATERIAL:

SERVICE: Reinstall the door seal as described on the following pages.
- identify the position of the loosened primary seal.
- carefully fold the primary seal so the surface to be glued becomes accessible.
- apply a small amount of glue.
- push the primary seal back in the original position, and hold it for 60 seconds.

NOTE

Use a limited amount of glue in order to avoid spilling. Spilled glue needs to be removed immediately!

NOTE

The areas of concern are shown in these pictures and would apply to any of the vehicle types affected.

Body - Front/Rear Door Weatherstrips Come Loose|Page 161 > < Instruments - BLIS Service Required With Specific DTC's|Page 155