volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 1182 > < Reading and Clearing Diagnostic Trouble Codes|Page 1180
Page 29
background image

Yes - Troubleshooting procedure complete

No - Replacing the component

-------------------------------------------------

Replacing the component

Try replacing the steering wheel module (SWM).

Caution! A new control module is delivered without software. The control module must be programmed in order to function after replacement.

Other information:

-

To replace and program the steering wheel module (SWM), see Steering wheel module (SWM), replacing See: Service and Repair/Steering Wheel
Module (SWM), Replacing.

-------------------------------------------------

Fault-Tracing Information

Fault-tracing information

Condition

-

No PHM DTCs are stored in the Central electronic module (CEM).

-

No DTCs are stored in the Steering wheel module (SWM).

Possible source

-

Open-circuit, short-circuit to supply voltage or short-circuit to ground in the cable.

-

Faulty contact reel.

Fault symptom[s]

-

Steering wheel keypads does not work

Checking the Contact Reel

Reading and Clearing Diagnostic Trouble Codes|Page 1182 > < Reading and Clearing Diagnostic Trouble Codes|Page 1180