XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
-
To access the cruise control switch, see Keypad steering wheel, replacing, TF-80SC AWD, AW50/51 AWD, M66 AWD See: Accessories and
Optional Equipment/Sensors and Switches - Accessories and Optional Equipment/Steering Mounted Controls Assembly/Service and
Repair/Keypad Steering Wheel, Replacing.
Was the status of the cruise control switch OK?
Yes - Troubleshooting procedure complete
No - Checking components and wiring
-------------------------------------------------
Checking components and wiring
Check the voltage between terminals #B1 and #B3. Voltage must be approximately 12 V.
Check the voltage between terminals #B2 and #B3. Voltage must be approximately 5 V.
Check the voltage between terminal #B3 and the battery negative terminal. Voltage must be approximately 0 V.
If the above readings are OK, the fault is in the cruise control switch.
Other information:
-
To connect the breakout box, see Connecting the breakout box See: Pinout Values and Diagnostic Parameters/Connecting the Breakout Box.
