volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Back-Up (Reversing) Warning Sensor (Parking Assistance Module (PAM)), Replacing|Page 1455 > < Parking Assistance Sensor (OPN) 1-4, XC90|Page 1452
Page 1
background image

Parking Assist Distance Sensor: Service and Repair
Back-Up (Reversing) Warning Sensor (Parking Assistance Module (PAM)), Replacing

Back-up (reversing) warning sensor (parking assistance module (PAM)), replacing

Special tools:

981 4214 Plug Cap Pliers See: Tools and Equipment/981 4214 Plug Cap Pliers 

Removal

Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.

Removing the back-up (reversing) warning sensor

Note! The parking assistance module (PAM) is located behind the left-hand wheel arch in the cargo compartment.

Ignition off.

Fold up the floor hatch in the cargo compartment
Remove the corner piece (1) from the floor on the left-hand side. See the illustration.

Disconnecting the connector

Back-Up (Reversing) Warning Sensor (Parking Assistance Module (PAM)), Replacing|Page 1455 > < Parking Assistance Sensor (OPN) 1-4, XC90|Page 1452