volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Back-Up (Reversing) Warning Sensor (Parking Assistance Module (PAM)), Replacing|Page 1464 > < Back-Up (Reversing) Warning Sensor (Parking Assistance Module (PAM)), Replacing|Page 1462
Page 5
background image

-

Turn the ignition key to position 0

-

Disconnect the battery negative lead.

Note! Wait at least five minutes before disconnecting the connectors or removing other electrical equipment.

-

Clean the bumper. Use a mild soap solution.

Applies to cars with two rows of seats

-

Fold up the rear centre floor hatch. If the floor hatch has a carrier bag holder on the underneath, it is secured by a strap on each of the shorter sides
of the storage box. These straps must be undone

-

Remove the storage box underneath and lift it out

-

On two-wheel drive cars, remove the floor hatch completely by folding it back slightly and pulling it backwards out of its mountings.

Applies to cars with three rows of seats and the integrated carrier bag holder on the underside of the centre floor hatch

-

Fold up the rear centre floor hatch

Back-Up (Reversing) Warning Sensor (Parking Assistance Module (PAM)), Replacing|Page 1464 > < Back-Up (Reversing) Warning Sensor (Parking Assistance Module (PAM)), Replacing|Page 1462