volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Back-Up (Reversing) Warning Sensor (Parking Assistance Module (PAM)), Replacing|Page 1477 > < Back-Up (Reversing) Warning Sensor (Parking Assistance Module (PAM)), Replacing|Page 1475
Page 18
background image

Illustration C applies to cars with three rows of seats

-

Remove the two screws (2) from under the cover

-

Remove the covers (3) over the front mountings for the left-hand side panel. Pry the covers off. Use a plastic weatherstrip tool or a small
screwdriver

-

Remove the screws (4)

-

Remove the clip (5) at the bottom of the storage compartment in the panel (Applies to cars with three rows of seats)

-

Pull out the panel slightly at the top edge so that the clips on the inside release. Remove the panel by pulling it straight upwards.

-

Clean the flat surface where the Velcro strips will be applied. Use a mixture of 30% windscreen washer fluid and 70% water

-

Wipe dry.

Back-Up (Reversing) Warning Sensor (Parking Assistance Module (PAM)), Replacing|Page 1477 > < Back-Up (Reversing) Warning Sensor (Parking Assistance Module (PAM)), Replacing|Page 1475