volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Checking Fuel and Residual Pressures|Page 4350 > < Checking Fuel and Residual Pressures
Page 2
background image

-

Switch off the ignition

-

Disconnect the cable between the terminals on the relay base

-

Reinstall the fuel pump (FP) relay.

The line pressure must not fall below 200 kPa within 20 minutes of the fuel pump (FP) being shut-off.
Remedy as necessary.

Other information:

-

For the location of and to replace the injector on 5-cylinder engines, see See: Powertrain Management/Fuel Delivery and Air Induction/Fuel
Injector/Service and Repair. For 6-cylinder engines, see See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and
Repair 

-

For the location of and to replace the fuel pump (FP) relay, see Central electronic module (CEM), replacing See: Body and Frame/Body Control
Systems/Body Control Module/Service and Repair 

-

For the location of and to replace the fuel pump (FP), see Right side fuel pump with level sensor See: Instrument Panel, Gauges and Warning
Indicators/Fuel Gauge Sender/Service and Repair/Right Side Fuel Pump with Level Sensor 

-

To disconnect the pressure gauge, see, Fuel pressure gauge See: Fuel Pressure Gauge.

Checking Fuel and Residual Pressures|Page 4350 > < Checking Fuel and Residual Pressures