volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Central Electrical Module - DTC's Set/Systems Errors|Page 166 > < Central Electrical Module - DTC's Set/Systems Errors|Page 164
Page 3
background image

Save the attachment screws to attach the new cover to the plenum floor.

Installing the new seal

Route the cable harness through the new rubber grommet and cover.

Caution! Exercise caution so that the rubber grommet is not damaged when the connectors are threaded through.

Align the arrows (1) towards each other.
Arrow (2) must point towards the handle on
the rubber grommet.

Installing the cable ties

Central Electrical Module - DTC's Set/Systems Errors|Page 166 > < Central Electrical Module - DTC's Set/Systems Errors|Page 164