XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Note! Switch on the ignition.
Order the software. See: Testing and Inspection/Programming and Relearning/Software Downloading
Use VIDA vehicle communication to calibrate the control module.
Visual check.
Turn on the ignition.
Wait five seconds and until the symbol for the brakes on the dashboard has gone out.
In the event of a fault (the symbol is lit).
Check that the connector is connected.
Read off any diagnostic trouble codes (DTCs) stored in the control module. Erase.
Interrupt the diagnostic function by turning off the ignition.
Test drive the car, see Test Drive Form (ABS), description See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and
Inspection/Initial Inspection and Diagnostic Overview/Test Drive Form (ABS), Description.
Check that no diagnostic trouble codes (DTCs) are stored.
Interrupt the diagnostic function by turning off the ignition.
