XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Note! For tightening torques, see: Tightening torque See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical
Specifications/Tightening Torque.
Installing the thermostat housing
Install:
-
the hose for the water heated crankcase ventilation. Before installing the thermostat housing, use a new hose clamp
-
a new gasket
-
the thermostat housing assembly. Tighten the screws
-
the upper radiator hose. Tighten the hose clamp.
Connect the connector for the temperature sensor.
Finishing
Note! Ensure that the auxiliaries belt is correctly positioned on all the pulleys.
Install:
-
the power steering pump. Tighten the 3 x screws
-
the auxiliaries belt. Use 999 7109 Wrench See: Tools and Equipment/999 7109 Wrench
-
the upper camshaft cover.
Installing control modules
