volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Temperature and Pressure Sensors, Replacing|Page 3548 > < Temperature and Pressure Sensors, Replacing|Page 3546
Page 3
background image

Note! Make a note of the routing of the belt.

Remove:

-

the auxiliaries belt. Use 999 7109 Wrench See: Tools and Equipment/999 7109 Wrench 

-

the upper timing belt cover.

Removing the power steering pump

Remove the 3 x screws for the power steering pump. Place the power steering pump to one side.

Removing the thermostat housing

Remove:

-

the hose clamp to the upper radiator hose. Disconnect the hose from the thermostat housing

-

the connector from the temperature sensor

-

the 2 x screws for the thermostat housing at the section against the cylinder head

-

the thermostat housing from the cylinder head

-

the hose clamp for the water hose for heating crankcase ventilation.

Transfer the temperature sensor to the new thermostat housing.

Installation

Temperature and Pressure Sensors, Replacing|Page 3548 > < Temperature and Pressure Sensors, Replacing|Page 3546