Volvo Workshop Service and Repair Manuals

-

The O-ring from the throttle valve seat in the coupling housing.

Installation

Note! For tightening torques, see: See: Specifications/Mechanical Specifications/Automatic Transmission/Transaxle/System Specifications/Tightening
Torque

Components which are included in the kit and must be replaced

Temperature-/pressure sensor with O-ring.
Washer.
O-ring for the throttle valve seat.

Installing the included components

Install:

-

Differential electronic module (DEM)

-

the seal plate

-

the washer

-

the throttle plate with the O-rings

-

temperature/pressure sensor with the O-rings

-

the screws.

The O-ring for the throttle valve seat is installed separately.

Placing the sealing plate in the control module