XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Antitheft Motion Sensor: Service and Repair
Mass Movement Sensor Module (MMS) Rear, Replacing
Mass movement sensor module (MMS) rear, replacing
Removal
Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Deactivate alarm.
Remove:
-
the panels for the D-posts. See Panel D-post, replacing See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Panel
D-Post, Replacing
-
the cantrail. See Panel cantrail, replacing See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Panel Cantrail, Replacing
-
the cover over the screws for the cargo net holder. See the illustration
-
the screws for the cargo net holder.
Remove the clips for the headlining as illustrated.
Removing the mass movement sensor module (MMS)
Hint: The sensor is secured to the top of the headlining using double-sided adhesive tape.
Note! When working on the headlining, ensure that there are no creases.
Carefully bend down the headlining and twist off the sensor. Disconnect sensor connector.
Installation