XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Hint: If the readout of tailgate wiper status was OK, the fault was caused by a damaged fuse or relay. The fuse can blow if relays are activated in the
wrong order. This can happen when the key is turned from position I to position II and the wiper arm is activated at the same time.
Was the tailgate wiper status OK?
Yes - Troubleshooting procedure complete
No - Replacing the component
-------------------------------------------------
Replacing the component
Replace the wiper switch.
Other information:
-
For replacing the wiper switch: Washer / wiper switch, replacing See: Sensors and Switches/Sensors and Switches - Wiper and Washer
Systems/Wiper Switch/Service and Repair
Select "Continue" when the fault has been remedied.
Continue - Checking components
-------------------------------------------------
Checking components
Activate the tailgate wiper. Read off the status.
Hint: If the tailgate wiper switch status is OK the fault is in the tailgate wiper.
Was the tailgate wiper status OK?
Yes - Troubleshooting procedure complete
No - Replacing the component
-------------------------------------------------
Replacing the component
Try replacing the steering wheel module (SWM).
Caution! A new control module is delivered without software. The control module must be programmed in order to function after replacement.
Other information:
-
For replacing and programming and replacing the control module: Steering wheel module (SWM), replacing See: Service and Repair/Steering
Wheel Module (SWM), Replacing