XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Remove:
-
the connector
-
the 2 screws
-
the electric motor. Carefully pull it straight out.
Installing the rear electric motor for the seat cushion
Note! For tightening torques, see.
Install the electric motor.
Note! Do not damage the shaft.
Install:
-
the 2 M5 screws. Tighten
-
the connector
-
the front seat. See Upholstery back rest, replacing See: Seat Cover/Service and Repair/Front Seat, Driver's Seat, Front Seat/Upholstery Backrest,
Replacing
-
the battery lead. See Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.
Front electric motor cushion, replacing
Removing the front electric motor for the seat cushion