XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Replacing sensor cable, right-hand side
4
Disconnect the connector for the sensor.
Disconnect the cable duct from the torque rod bracket by carefully prying it off.
Replacing sensor cable, right-hand side, contd.
5
Pull up the sensor cable together with the cable duct so that the new sensor connector can be connected.
Remove the tape and connect the connector. Remove the old sensor cable from the cable duct.
Install the new sensor cable in the cable duct using a new cable tie.
Install the cable duct on the torque rod bracket.