XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
-
Remove the six screws and the engine splash guard.
-
Detach the existing ground cable for the front socket on the underside of the left-hand frame member.
-
Route the ground cable on from the relay. Connect both ground cables to the existing ground terminal and tighten the ground screw firmly.
-
Detach the cable for the passenger compartment connector socket from the clip in the edge of the plate, at the bending rubber hose for the water
drainage.
-
Route the rubber grommet with cable out to the passenger compartment connector socket from the passenger compartment.
-
Remove the rubber grommet from the cable and place it to one side. There is a new rubber grommet on the routed cable.
