XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
-
the plastic nuts for the hatch in the right wing liner
-
the right front wheel. See Installing wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair.
Install the front timing cover. See See: Timing Components/Timing Cover/Service and Repair
Tension the auxiliaries belt. Check that it is correctly positioned on all pulleys.
Install:
-
the expansion tank
-
the hose between the expansion tank and the radiator. Remove the lock grip pliers
-
the servo reservoir
-
the upper timing cover.
Twist the intake pipe for the turbocharger for cylinders 1, 2 and 3 into position. Tighten the clamp. Install the plastic hoses between the turbocharger
(TC) and the charge air cooler and between the air cleaner (ACL) and the turbocharger (TC). Tighten the hose clamps.
Install:
-
the engine stabilizer brace. Tighten the screws
-
the screw holding the engine stabilizer brace to the bracket on the engine. Tighten
-
the battery negative lead. Also read Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery,
Disconnecting.
Final check
Check and top up if required:
-
coolant level
-
the servo fluid level. Test drive the engine.
Removal and Installation
Preparation
