XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Installing intake manifold/gasket
Make sure that the gasket faces are clean.
Install a new gasket with the two centermost screws in the lower row.
Lower the intake over the 2 screws.
Install the remaining screws.
Tighten all the screws with 20 Nm.
Finishing
Connect the throttle body (TB) connector.
Install
-
the vacuum hoses according to the earlier markings
-
the nipple for the crankcase ventilation under the intake manifold
-
the dip stick mounting screw to the intake manifold. Tighten to 25 Nm
-
the plastic charge air pipe between the throttle body (TB) and the charge air cooler (CAC).
