XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Variable Valve Timing Actuator: Testing and Inspection
Variable valve timing unit, checking and adjusting
Special tools:
999 5451 Adjustment Tool See: Tools and Equipment/999 5451 Adjustment Tool
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Caution! This element must be carried out with precision as any deviation could generate a fault symptom.
Installing the crankshaft adjustment tool
Remove the starter motor mounting screws. Pull out the starter motor and put it aside.
Remove the blind cover plug for the adjustment tool hole. Turn the crankshaft clockwise slightly. Install the adjustment tool 999 5451 Adjustment Tool
See: Tools and Equipment/999 5451 Adjustment Tool , making sure it bottoms against the engine block.
Aligning the crankshaft
Turn the crankshaft counterclockwise to its stop against the crankshaft adjustment tool. Check that the marking on the crankshaft timing gear pulley
aligns with the marking on the oil pump.
Installing variable valve timing camshafts