volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Application and ID|Page 3971 > < Application and ID|Page 3969
Page 1
background image

Catalytic Converter: Service and Repair

Three-way catalytic converter (TWC), replacing

Special tools:

999 5543 Socket NV-22 HO2S See: Tools and Equipment/999 5543 Socket NV-22 HO2S 
999 5972 Fixture See: Tools and Equipment/999 5972 Fixture 
951 2050 Bevel Protractor See: Tools and Equipment/951 2050 Bevel Protractor 
999 7057 Counterhold See: Tools and Equipment/999 7057 Counterhold 

Removal

Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.

Removing the lower steering shaft joint

-

Set the front wheels so that they are straight

-

Fold back the floor carpet

-

Bend up the outer section of the steering shaft boot

-

Remove the retaining clip around the boot

-

Pull the boot up

-

Turn the steering wheel to gain the best possible access to the steering shaft nut

-

Remove the ignition key. Activate the steering wheel lock.

Caution! Do not move the steering wheel. The contact reel in the SRS (supplemental restraint system) could be damaged.

Remove:

-

the screw securing the mounting for the steering shaft in the joint

-

the joint from the steering shaft by pressing the shaft upwards.

Removing protective plate

Application and ID|Page 3971 > < Application and ID|Page 3969