XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Air Door Actuator / Motor: Service and Repair
Damper Motor Temperature, Replacing
L.H.D
Damper motor temperature, replacing
As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential
information in the illustrations is always correct.
Damper motor temperature passenger side, replacing
Removing the passenger side temperature damper motor
Remove:
-
the glove compartment. See Glove compartment, replacing See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and
Repair
-
the screws
-
the motor
-
the switch.
Installing the passenger side temperature damper motor
Position the motor.
Turn the shaft on the motor so that the motor can be positioned.
Install:
-
the screws
-
the switch.
Carry out self-adjustment of the damper motor end positions. This is carried out via VIDA communication.
Install the glove compartment. See Glove compartment, replacing See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and
Repair.
Damper motor temperature driver's side, replacing
Removing the driver's side temperature damper motor