XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Remove the screw from the rear view mirror.
Remove the interior lighting.
Installation
Note! For tightening torques, see Specifications See: Specifications/Mechanical Specifications/Starting and Charging/System Specifications.
Installing the interior lighting
Install:
-
the screw for the rear view mirror. Tighten
Caution! Check that the microphone cable is not trapped (if applicable).
the ground lead. Connect the connector. Align the interior lighting on the gear selector module (GSM) antenna locating pins (1) and press into place
-
the screws. Tighten.
Finishing work
Install the cover.
Install the lens for the interior lighting. See Bulb interior lighting, replacing See: Bulb Interior Lighting, Replacing.