XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Remove:
-
the filter insert from the housing
-
the O-ring that seals between the housing and the oil trough.
Allow the filter insert to drain and then discard it in an approved place.
Installing the oil filter
Caution! Clean the housing.
Install:
-
a new filter insert
-
a new O-ring. Lubricate the O-ring
-
the oil filter housing. Tighten to Tightening torque, B6324S See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical
Specifications/Tightening Torque.
Install the lower cover.
Filling with engine oil
Top up oil. See: See: Engine, Cooling and Exhaust/Engine/Specifications/Capacity Specifications/Lubricants, Engine
Check:
Start the engine and check for oil leakage.
Stop the engine and give the oil time to run down into the oil pan.
Then check the oil level. Top up if necessary but do not overfill. Wipe the engine compartment clean. Ensure that the steering wheel and the gear
selector lever are clean.