volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 2910 > < Procedures|Page 2908
Page 2
background image

Secured with 7 screws.

Remove the oil pan and the seal

Warning! Avoid skin contact with the oil. There is a risk of burns.

Allow the remaining oil to run out into a container.
Clean the oil pan.

Note! The gasket can be reused once.

Remove the oil filter

The filter is only secured to the transmission by a plastic pipe and an O-ring.
Use a jimmy bar.
Position the jimmy bar by the pipe connecting the oil filter to the transmission.
Pry off the oil filter straight downward. Hold the filter.

Note! Use extractor 999 4090 EXTRACTOR See: Tools and Equipment/999 4090 Extractor if the plastic pipe comes off. Pull out the pipe and
the O-ring. Replace the O-ring.

Install the oil filter

Procedures|Page 2910 > < Procedures|Page 2908