XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Engine Speed Sensor: Service and Repair
Engine Speed (RPM) Sensor, Replacing
Removing the engine speed (RPM) sensor
NOTE: As the illustrations in this service information are used for different model years and/or models, some variation may occur.
However, the essential information in the illustrations is always correct.
Remove:
-
the hose clamp for the air cleaner (ACL) / fresh air intake
-
the air cleaner (ACL) in the intake pipe
-
lift out the air cleaner (ACL).
Remove the mounting nut for the sensor.
Pull up the sensor.
Installing the engine speed (RPM) sensor
Install the sensor. Use a new nut. Tighten to 10 Nm.
Install
-
the air cleaner (ACL) housing and the hose clamp for the air cleaner (ACL) / fresh air intake
-
the intake pipe.