XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Undo the 3 timing gear pulley screws slightly (both timing gear pulleys). Install the center plug in the variable valve timing unit. Tighten following
Tightening torque, B6324S See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical Specifications/Tightening Torque.
Hold the center plug in place with 25 Nm while the 3 screws on the camshaft timing gear pulley are tightened. See Tightening torque, B6324S See:
Engine, Cooling and Exhaust/Engine/Specifications/Mechanical Specifications/Tightening Torque. This is to ensure that the variable valve timing unit is
in its end position when the timing gear pulley is fastened.
Removing the camshaft adjustment tool
Remove the camshaft adjustment tool 999 5452 Camshaft Adjustment Tool See: Tools and Equipment/999 5452 Camshaft Adjustment Tool and the
crankshaft adjustment tool 999 5451 Adjustment Tool See: Tools and Equipment/999 5451 Adjustment Tool.
Install the plug to the starter motor with a new washer and tighten. See Tightening torque, B6324S See: Engine, Cooling and
Exhaust/Engine/Specifications/Mechanical Specifications/Tightening Torque.
Final check