XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Carefully install the valve housing over the pump shaft (Be careful with the (2) strainers).
Caution! The valve housing may not be twisted.
Hold it in position against the housing and install the screws 377, lightly tightened.
Install guide sleeve 410 and the screw 376 on the valve housing tightened lightly.
Note! The guide sleeve ensures that the distribution plate/valve housing are positioned correctly.
Transferring
1. Pressure switch -2002
2. Pressure switch 2003-
Caution! The screws are of different lengths. It is important that the screws are installed in the right place.
Control system for cars of model year -2002
Transfer the pressure sensor to the new valve housing.