XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Shift Solenoid: Service and Repair
Solenoid Line Pressure, Replacing
Solenoid line pressure, replacing
Removing the side cover from the transmission
See Side cover transmission, removing See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Removal and
Replacement/Automatic Transmission Components/Side Cover Transmission, Removing.
Removing the line pressure solenoid
Remove:
-
the connector
-
the spring clamp. Pull it straight out. Use a small screwdriver to bend the clamp out slightly
-
the solenoid from the control system. Use a screwdriver. Insert it between the solenoid and the control system. Carefully pry and pull on the
solenoid at the same time. Check that the O-rings remain on the solenoid.
Installing the solenoid