volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Control System/Valve Housing, Removing|Page 6071 > < Control System/Valve Housing, Removing|Page 6069
Page 32
background image

Apply a little petroleum jelly to the solenoid O-ring.

Install:

-

the solenoid by pressing it. Guide the solenoid in so that the locating pin on the side locates in the cut-out

-

the spring clamp. Check that the spring clamp is locked

-

the connector.

Installing the side cover on the transmission

See Side cover transmission, installing See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Removal and
Replacement/Automatic Transmission Components/Side Cover Transmission, Installing.

Solenoid Shifting 2-3, Replacing

Solenoid shifting 2-3, replacing

Removing the side cover from the transmission

See Side cover transmission, removing See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Removal and
Replacement/Automatic Transmission Components/Side Cover Transmission, Removing.

Removing solenoid S2

Control System/Valve Housing, Removing|Page 6071 > < Control System/Valve Housing, Removing|Page 6069