volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Location of Components For Brake Electronics|Page 481 > < Location of Components For Brake Electronics|Page 479
Page 1
background image

Electronic Brake Control Module: Service and Repair

Brake control module (BCM), replacing

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.

Preparation

Remove the battery lead. See Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.

Removing the air cleaner (ACL) housing

Remove the screws (1) for the intake manifold.
Disconnect the hose clamp (2) for the air hose.
Remove the connector (3) from the mass air flow (MAF) sensor.
Remove the air cleaner (ACL) housing from its mountings. Pull it straight up.

Removing the integrated relay / fusebox

Location of Components For Brake Electronics|Page 481 > < Location of Components For Brake Electronics|Page 479