volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 1138 > < Reading and Clearing Diagnostic Trouble Codes|Page 1136
Page 32
background image

-

No diagnostic trouble codes are displayed in the SWM.

Possible source

-

Defective windscreen-wiper switch

-

Defective control unit.

Fault symptom[s]

-

Windscreen wipers operate at low speed.

Checking the Windshield Wiper Switch

Checking the windshield wiper switch

Checking components

Activate the windshield wiper switch. Read off the status.

Hint: If the wiper switch status is OK the fault is not in the steering wheel module (SWM).

Was the wiper switch status OK?

Yes - No Fault Found

No - Replacing the component

-------------------------------------------------

Replacing the component

Replace the wiper switch

Other information:

-

To replace the wiper switch, see Washer / wiper switch, replacing See: Sensors and Switches/Sensors and Switches - Wiper and Washer
Systems/Wiper Switch/Service and Repair.

Select "Continue" when the fault has been remedied.

Continue - Checking components

-------------------------------------------------

Checking components

Activate the windshield wiper switch. Read off the status.

Hint: The fault is in the windshield wiper switch if the windshield wiper switch status is OK.

Was the wiper switch status OK?

Yes - Troubleshooting procedure complete

No - Replacing the component

Reading and Clearing Diagnostic Trouble Codes|Page 1138 > < Reading and Clearing Diagnostic Trouble Codes|Page 1136