XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Checking the upper seat belt mountings on the second row of seats,
8
outer seats, continued.
Remove:
-
the C post panel
-
the connector (if there is one).
Checking the upper seat belt mountings on the second row of seats,
9
outer seats
Ensure that the screw is correctly positioned and secure.
Use a torque wrench with relevant socket to check that the screw is secure.
Set the torque wrench to 10 Nm. Test tighten the screw.
If 10 Nm is reached without the screw turning then the screw is correctly tightened.
Note!
If the screw moves before reaching 10 Nm, remove it. Check that the threads are intact and that locking fluid is present.
Note!
If the threads are distressed or the locking fluid is absent, replace the screw with a new one P/N 974336.
Install the screw. Tighten to 25 Nm.