XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Installing the vacuum nipple
7
Wet the plastic hose on the new nipple. Use a soap solution.
Press the hose through the insulation following the previous routing.
Install the hose and nipple on the oil trap. Use a new clamp.
Installing the vacuum nipple, continued
8
Install the engine coolant hoses on the vacuum nipple. Use new clamps.
Remove the hose clips.
Installing the vacuum nipple, continue
9
Fold the insulation back into place.
If the insulation breaks, apply tape over the crack.
Installing the intake manifold
10