XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Was a fault detected?
Yes - Remedy as necessary.
No - Checking the resistance of the sensor
-------------------------------------------------
Checking the resistance of the sensor
Check the resistance of both the fuel level sensors. The resistance across each sensor may vary between 12 ohms (full fuel tank) and 383 ohms (empty
fuel tank).
Hint: The resistance of the left fuel level sensor can be measured between terminals #5 and #6 on the connector for the fuel level sensors. The resistance
of the right fuel level sensor can be measured between terminals #6 and #7 on the connector for the fuel level sensors.
Remedy as necessary.
Other information:
-
For further information about signals and other values, see Signal specification See: Body and Frame/Body Control Systems/Testing and
Inspection/Pinout Values and Diagnostic Parameters/Signal Specification
-
To access the connector/replace the fuel level sensor connector (left-hand side), see Level sensor fuel tank, replacing See: Service and
Repair/Level Sensor, Fuel Tank, Right-Hand/Fuel Tank, Replacing
-
To access the connector/replace the fuel level sensor connector (right-hand side), see Level sensor, fuel tank, right-hand/fuel tank, replacing See:
Service and Repair/Level Sensor, Fuel Tank, Right-Hand/Fuel Tank, Replacing.
