XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Yes - No Fault Found
No - Replacing the component
-------------------------------------------------
Replacing the component
Replace the turn signal lamp switch
Other information:
-
To replace the turn signal lamp switch, see Turn signal switch, replacing, TF-80SC AWD, AW50/51 AWD, M66 AWD See: Lighting and
Horns/Sensors and Switches - Lighting and Horns/Turn Signal Switch/Service and Repair.
Select "Continue" when the fault has been remedied.
Continue - Checking components
-------------------------------------------------
Checking components
Activate the reset button on the turn signal lamp switch. Read off the status.
Hint: If the read and reset button status is OK, the fault is in the turn signal lamp switch.
Was the status of the read and reset button correct?
Yes - FAULT FOUND
no - Replacing the component
-------------------------------------------------
Replacing the component
Try replacing the steering wheel module (SWM).
Caution! A new control module is delivered without software. The control module must be programmed in order to function after replacement.
Other information:
-
To replace and program the steering wheel module (SWM), see Steering wheel module (SWM), replacing See: Service and Repair/Steering Wheel
Module (SWM), Replacing.